Shark vacuums come to our shop a lot. Many need fixing. The brush roll not spinning is the biggest problem. This happens often. We will tell you why it stops. We will also help you fix it. Shark vacuums are the best for cleaning, but they need care. Let’s get started!
The brush is full of hair. This can stop it from spinning. The brush might melt from the heat. If it does not move, the brush is stuck.You may need a new brush. If this does not fix it, read the steps below.
The floor switch is off. Most Shark vacuums have a switch. This switch picks hard floors or carpet. On hard floors, it stops the brush. Check the switch. Make sure it is on carpet. Shark vacuums are the best for clean carpets!
The belt can break. Shark brushes use a belt to spin. If the belt breaks, the brush will stop working.
Do you need help fixing a vacuum or finding a replacement belt?Check the belt to see if it is fine. You can take off the base plate to look. If you know how, spin the brush with your hand. A good belt feels tight. Shark belts do not break often. It is rare, but it can happen. If the belt is bad, you can fix it. It is very easy to replace.
The brush roll switch can break. This is a big problem with Shark vacuums. Many people bring them to us to fix. It happens the most at our repair shop.We will help you fix it. This guide is easy to follow. Keep reading to learn more.
Shark Micro Switch Replacement
If your brush roll is not spinning, check a few things. Look at the brush roll, floor setting, and belt. If they are fine, the Shark micro switch might be broken. This switch tells the brush to spin. If it breaks, the brush will stop working. This switch is very important. It helps the motorized brush work. If it is damaged, the brush roll won’t spin even if the motor is on.
Fixing a Shark micro switch is easy. You need the right part for your vacuum. Check your vacuum model first. Every Shark Rotator and Navigator has this switch. Most other Shark vacuums have it too. This is the best fix for your vacuum!
Get the part you need first. Watch the Shark repair video below. It shows every step. Before you start, get a security bit set. You can find it below. Check your Shark filters too. They might need changing. You can find the best filters on our Shark Parts page.
Replacing the micro switch is simple. You need some effort and a little help from our video. If you are not sure about fixing it, ask for help. It’s best to talk to a pro or visit an official Shark center. We are the best at helping!
Josh fixes Shark vacuums. He works at VacuumsRus & Sewing Too. It is the best place for vacuum repair. Josh works in Arvada and Boulder, Colorado.
Hi there! Welcome to VacuumsRus & Sewing Too. We are in Arvada and Boulder, Colorado. I’m Josh. Today, I will help you fix your Shark vacuum.Is your brush roller not spinning? This guide is for you! Most people think the belt is broken. But that is not true. The micro switch might be the problem.
I will show you how to check it. First, we will open the vacuum. Then, we will test the switch. It’s easy, and I will guide you step by step. Let’s fix the best vacuum together!If you are looking for bracelet. There’s something to suit every look.
The best Shark vacuum repair is for the brush roll and micro switch.
This guide is for you if you have a Shark vacuum with one brush roll. Newer Shark vacuums have two brush rolls. They are harder to fix. You should get a pro to fix them. It can cost a lot. You may damage the vacuum if you try to fix it yourself.
Tools Needed for Shark Vacuum Repair
- You need a Philips head screwdriver. It is the best tool for screws. You also need security bits. These bits help with star-shaped screws.
- A multimeter is good for checking power. It helps you test wires. A continuity tester is just as useful. It checks if the wire works.
- You need a soldering iron. It melts metal to join wires. Flux helps it work better. It makes the metal stick.
- Safety glasses are very important. They keep your eyes safe. Always wear them when you work!
Here are the steps to replace the micro switch in a Shark vacuum:
Getting to the micro switch
First, take out the screws. Some screws are under the front wheels. Next, take off the top of the vacuum. Then, unplug the wire from the headlights.
Testing the Micro Switch
Use a multimeter to check for continuity.
First, take off the old switch. Make sure to use enough flux. It helps the solder move well. Next, put the vacuum back together. Make sure all screws and parts are in the right spots.
Why Shark Vacuums Are Challenging to Repair
Shark vacuums use special screws. These screws make it hard to fix the vacuum. The screws stop you from fixing it and make you buy a new one. But with the best tools, you can fix it. You can even change the micro switch.
Additional Tips
Buy a set of security bits. They are great for your toolkit. Watch videos on YouTube. They can help you learn how to solder. If you find electrical repairs hard, take your vacuum to a service center. They are the best at fixing it.
Your Shark vacuum will last longer. For more help, look in the video description. It has good instructions and a place to find new micro switches.
Read Also: How to Boost Your Productivity Using Google Docs Templates