The Shark Steam Mop is the best way to keep your floors clean. To start, open the mop and make sure that all its items are connected. You will be given a receipt or paper with instructions on it. Assemble the water tank and the cleaning head according to the instructions. Fill the water tank with cold water through the filling cup inside. The mop is designed to be cleaned using steam only. Attach a clean mop base and make sure that it is not loose.
Apply the mop to the floor and wait for it to heat up; it takes about 30 seconds. When it is ready and for the floor, slowly pump the handle where there are more clean stains. Keep it there for a while. See how it shows its brilliance. The mop there is good for use on seven wooden tires and floors. And if you want to avoid damage, use it on a gel-sealed area. Press it.
After doing this, unplug the mop and let it cool down. Then, keep the mop aside and wash it by hand or in water as instructed. You just drain off any water that is left, separate it, and let it cool down. You have to keep it upright where you want it to be. Take care of it regularly and keep it clean.
Choosing the Right Mop Pad
Choosing the right mop pad for your Shark Steam Mop is important for the best cleaning results. Shark offers a variety of mop pads designed for cleaning. We like to use micro-paper, which will help you remove dirt and grime without scratching. You clean it properly and use it well. It will work great. Check the size before using. Just make sure the pad is compatible with your mop model.
When choosing a mop pad, first check the floor of your house. According to the mop, you can use a soft pad for wood, which will not damage your floor. You can take a very good pad for tiles and stone floors. Always remember that before applying the mop pad, you should clean any dirt on it because if dirt or other particles are on it, it will ruin the floor.
Cleaning Different Floor Types
Cleaning different surfaces with a mop is easy when you adjust it well, such as hardwood floors. If you want to avoid moisture, use a low-steam mop that does not damage it. If you want to avoid the shine that occurs on the wood, use it well. To protect the soft surface, gently clean the dirt that gets on it with the microfiber mop pad. If you rub it for too long in one place, it can cause moisture and damage it.
Look at the dirt inside the surfaces of the tiles and/or stones; for that, you can use more steam. To do this, you can get a scrubbing mop pad. Run it slowly on the floor and let the dirt disappear. The shiny floor will be that. If you want to maintain the shine, use a soft pad. Ensure that the dirt on the floor is removed before using the steamer so that the water does not run to a place that can damage your floor.
Emptying the Water Tank After Use
When you have finished using the steam mop, it is very important to empty its water tank because it maintains its performance and can last for a long time. Unplug the mop and let it cool down. Remove the water tank and pour water into the drain. Find the release button on the top of the tank, protect it from damage, and take good care of it.
After the tank is empty, when you reassemble the mop and leave it open in a dry place, if you like, it prevents the moisture inside the tank from remaining, which prevents bacteria from growing. You should empty the tank regularly and properly, and when you use it again, it will be perfectly ready.
How to Wash and Reuse Mop Pads
Washing the pad of your Shark Steam Mop is very easy, and if you want to reuse it, it is a very easy task that maintains its cleanliness and makes it good. After each use, remove the pad carefully, let it cool down to avoid getting burned, and remove any dirt. Wash it with hot water to remove the dirt on it, and if you want to clean it more, use a brush with soap. Do not use bleach or anything similar that can damage it.
Once you clean it, when you start using it again, you will keep in mind that it has been dried by then, and do not put it in the dryer at all. Not at all. If you expose it to too much heat, its fibers will shrink, and it will not work properly. Wash it regularly, dry it well, and keep it in good condition. If you remove the dirt on it, it is much better to wash it with hot water. If you keep it around, it will last a long time. You will also save money.
Conclusion
In the end, you have to use the mop of your choice properly and clean it after use. Wash the mop or pad properly with hot water and let it cool down so that it does not burn. Be careful when using it on the floor, and use it properly. Protect it, and if you take good care of it, it will last for a long time. It will also save you money and time.
When you use it once, clean it before the next use or clean it immediately after use. It is good, so when you come to use it again, it is completely okay. If you continue to take good care of it, it will last for a long time, and there will be no problems or problems like that. So always wash it after using the mope of vacuum.